Filter By:
- Bar Ends (2)
- BMX (5)
- Bottom Brackets (6)
- Brakes/Levers/Pads (23)
- Cables (9)
- Cassettes/Freewheels (22)
- Chainrings (5)
- Chains (19)
- Show More Categories
- Cranksets (7)
- Derailleurs (6)
- Forks (3)
- Frames (27)
- Handlebar Grips/Tape (22)
- Handlebars (12)
- Pedals (38)
- Saddles (17)
- Seatposts (5)
- Shifters (4)
- Stems (13)
- Other (33)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts

$124.99
Making its debut on the all-new Roubaix the S-Works Future stem is the stiff lightweight upgrade that your Roubaix has been waiting for. It's compatible with all Future Shocks and our Specialized accessory mount and its sleek design will create a seamless integration.
- Sleek & seamless integration with all Future Shocks.
- Supremely stiff for responsive handling and feel.
- Compatible with the Specialized accesory mount.
- 6-degree rise
- Length options: 70-140mm
- Approximate weight: 145g (100mm)

$59.99
Shimano Dura-Ace BC-9000 Polymer Road Brake Cable & Housing sets reduce the sliding resistance to achieve lighter and quicker operation.
- Dura-Ace grade SLR-EV Road brake cable set
- Stainless steel for anti-rust protection
- Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur-like material from polymer coating will not affect the performance
- Pre-lubed with special polymer compatible grease

$12.99
Cable is coated with a durable low-friction polymer.
- Dupont Tefzel coating is more durable than previous coated cables
- Length: 2300mm
- Diameter: 1.2
- Cable Head: Shimano/SRAM
- Double Ended: No

$26.99 - $33.99
This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.

$12.99
Teflon slick cable that offers unbeatable stopping power. Match this up with the Xposure You brake and Mid lever and you'll be able to do massive skids!
-Stainless pre-stretched teflon coated innner
-Compressionless teflon lined outer
-2 ferrules included in pack

$14.15 - $23.50
The Problem Solvers Single Chainring Bolts include 5 chainring bolts and nuts that are 6mm wide. This is the right size for most single-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.

$79.99 - $99.99
- High-performance gear combinations provide superior rider choice
- Hub body to fit a variety of bikes from MTB to road
- Model Number: CS-HG800-11
- Series: Shimano
- Average Weight: 335 grams

$59.99
- 1/2" x 11/128"
- 116 Links
- EPT anti-rust coating
- 11-speed
- Compatible with Shimano, SRAM & Campagnolo 11-Speed Systems
- Mushroomed Pin Riveted

$47.99
Our thickest bar tape is ideal for your next double century, gravel grinder or cyclocross race. Discover why our Pro Tour teams spec this tape for the Spring Classics.

$90.99
$129.99
30% Off
- Carbon wrapped 3D forged Aluminum material
- Lengths: 80-130mm
- Angle: +/- 10°
- Handlebar clamp diameter: 31.8mm
- Suitable for 1-1/8” forks
- Color: Carbon
- Weight: from 120g

$10.00
This pair of 6" long extenders attaches the Old Man Mountain rack frame to the front fork. The extenders have a slot for adjustability, which allows you to level the rack on different types of bikes. Includes hardware.
- 6" length
- Includes slots for adjustability
- Made from 6061 aluminum and powder coated matte black for finish and durability
- Can be mounted to eyelets or to the Old Man Mountain pucks if your bike does not have eyelets
- May need to be bent to fit width of frame
- Includes hardware

$25.00 - $32.99
SRAM's Disc Brake Pads are reliable and rugged. These pads are compatible with Avid Trail and SRAM Guide and G2 disc brakes.

$29.99 - $44.99
Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp.
- 31.8mm can be used with 26.0 bars with additional shim (SM5317)
- Dimension stems are not intended for use with carbon handlebars or carbon steer tubes
- Weight: 130g-180g

$19.99
Serfas' BPS-100 Shimano Compatible Pads are functional and stylish, too. The triple compound pad cleans as it eliminates squeaks. Plus, the powder-coated finish adds a polished look. All hardware is included for easy installation.

$14.99
BikeSmart's Flat Resin Pedals are an affordable and durable platform pedal to fit any bicycle. They have concave platforms with traction pins on both sides for a great grip, strong steel axles and tough resin bodies. There are also reflectors for visibility.

$49.99
BB30 service kit includes 2 Enduro 6806 ABEC-3 sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems - Enduro ABEC-3 bearings

$108.00 - $128.00
- Chainrings Included: Yes
- Number of Chainrings: Single
- Pedal Spindle: 9/16"
- Rings: 42-tooth

$59.99
This soft foam pad provides a comfortable seating solution for passengers of all ages. Tool-free attachment to the upper rack platform preserves the rack side rails for mounting additional accessories, such as pannier adapters.
**For Globe Haul ST bike customers: Use of compatible (1) footrests (pegs), (2) passenger seat, (3) passenger handlebar, and (4) rear wheel cover required to safely carry passengers. All items available separately. **
Designed for frictionless compatibility with the Haul ST.
Reversible, asymmetric design allows for unlimited installation options.
Hook-and-loop strap attachment for fast and secure installation.

$32.99
- Top mount levers for use with caliper or cantilever brakes
- Forged aluminum
- Hinge clamp style
- Return spring and reach adjustment
- Black
- 90g / pair

$64.99
Crank Brothers' most versatile pedal. The Candy excels at it all – cyclocross, XC, trail, all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel.
- Spindle material: Forged scm 435 chromoly steel
- Body material: One piece composite
- Wing material: Stamped steel
- Spring material: 300 series stainless steel
- Release angle: 15° / 20°
- Q-factor: 52mm
- Inner bearing type: Igus LL-glide bearing
- Outer bearing type: Enduro cartridge bearing
- Cleat: Premium brass cleats with shims included
- Weight: 294g per pair
- Warranty: 5 years

$1,049.99
$1,400.00
25% Off
It's dealer's choice with the Status 160 frameset, but whatever the build, a good time is more than a safe bet. But that said, the odds of you being able to keep your poker face after getting a taste of the Status 160's playful Mixed Wheel-Size Trail Geometry are awfully tall.
- With an eye on keeping maintenance to a minimum, oversized pivot bearings increase durability while a common size across all pivots makes service and replacement a breeze when that day does come around. A threaded SRAM DUB bottom bracket continues on the theme with worry-free performance.
- The active, planted feel of the Status's FSR suspension design and Fox's FLOAT X Performance rear shock equipped with our Rx Trail Tune make for perfect friends—and plenty of benefits. Calling on a twin-tube design that allows for two separate oil pathways during compression and rebound, the FLOAT X Performance rear shock provides plenty of support for big hits while still offering enough buttery small-bump sensitivity to keep you fresh for when the style points really count.

$2,199.99
$3,400.00
35% Off
The S-Works Stumpjumper EVO is much more than just a trail bike; it's a shred-sled built to full-send down the gnarliest trails. Featuring an all-new design, with an adjustable head tube angle, 150mm of performance tuned travel, and the adaptability of S-Sizing, this thing is an absolute ripper. The S-Works Stumpjumper EVO - get rowdy.
This S-Works Stumpjumper EVO Frame is the perfect canvas to imagine your ultimate ride. Build your totally custom dream bike, make it a reality, and shred happily.
- All the travel in the world is useless without the proper shock tuning and kinematics. For the new Stumpjumper EVO design, we prioritized kinematic performance. Applying lessons learned while developing the Enduro, then following that with more than 1,000 hours of field and suspension lab development, we've not only improved the pedaling performance of the Stumpjumper, but we've made it more capable, agile, and lively. We increased anti-squat, so the suspension better resists pedal bob, and we further improved bump performance on square-edge hits. Bottom line? This thing shreds trails, not legs.
- Rider-First Engineered frames use a size-specific approach to ride characteristics that ensures benchmark handling and flawless performance, regardless of frame or rider size. Whether you're a jump-happy grom riding an S1, or a DH-fiend giant in need of the lengthy S6, you'll experience the same ride traits rail-sharp cornering and balanced front and rear stiffness at the lightest-possible weight.
- The S-Sizing geometry of the new Stumpjumper EVO is our most progressive yet. Long, low, slack, short offset fork, steeper seat tube angle these are requirements for modern progressive riding. But not everyone jibs the same way, which is why the geo on the new Stumpjumper EVO is fully adjustable with six different settings. You can adjust the BB height by 10mm, you can adjust your head angle by two-degrees, and you can make these adjustments independently of each other. Finally, if you want to go full-party mullet-mode, the EVO lets you run a 27.5-inch rear wheel mated with a 29-inch front.
- We introduced the SWAT door on the Stumpjumper in 2016, adding room IN your frame for those "oh sh**t" necessities like pumps and spare tubes, and immediately rendering jersey pockets redundant. With the new Stumpjumper, we have increased the volume and added a SWAT Bladder, giving you an extra 22oz of water storage, the same size as a small water bottle, hidden in your downtube.

$4,999.99
$5,500.00
9% Off
With Future Shock suspension front and rear, the new Diverge STR delivers compliance without compromise. By suspending the rider-instead of the bike-Future Shock technology increases control and efficiency while decreasing fatigue, so you'll be riding farther and faster over chunkier terrain than you believed possible. And the Diverge STR does this without the weight, sluggish pedal response, and inefficiency of other suspension systems. The S-Works Diverge STR starts with our FACT 11r carbon frameset with front and rear Future Shock suspension.
- By suspending the rider with damped, tunable travel-20mm front/30mm rear-Future Shock Technology absorbs bump forces to boost your control and capability while retaining the efficiency and responsiveness of a rigid frame. Because as far as power transfer goes, it is a rigid frame. Power to the pedals makes the bike jump like a scared cat. You're efficient, you're comfortable, you're in control. Your bike is light, nimble, and responsive.
- The new Diverge doesn't just have gorgeous lines, it has perfect curves too. Future Shock Rear puts 30mm of rear travel in the ideal path to smooth out rough road. Its hydraulic damping controls travel to eliminate "bobbing" under power and ensure big hits never catapult you from the saddle, all without compromising fit or pedaling efficiency.
- Born from decades of innovation and our Smoother is Faster philosophy, Future Shock was created to develop bikes that win on cobblestones, but it's found its purest expression on gravel. It's 20mm of adjustable, damped front travel that keeps you in control and on target, all while protecting your hands, arms, and shoulders from the battering.
- More capability means more confidence, more confidence means more rides, more rides mean more fun, and it all starts at the contact patch. Nothing unlocks capability like tire clearance, and we're feeling generous. 47mm on a 700c wheel and 2.1" on 650B. Diverge STR is the most capable gravel bike we've ever made, so it's the most fun. We did the math.
- The S-Works Diverge STR FACT 11r carbon frame is more compliant than any drop bar bike we have ever made yet adds just 100 grams compared to the S-Works Diverge frame. Never have so few grams added so much capability. Climb it, race it, or load it down with bags and gear for the long haul-Diverge STR does it all faster and smoother without any excess baggage.

$19.99
- Simple and reliable square taper bottom bracket
- Replaces both BB-UN26 and BB-UN55
- Sealed cartridge bearings
- Cr-Mo axle
- For bicycles equipped with a chain case, select BB-UN300-K
- For E-type front derailleur compatibility, choose BB-UN300-E
- Fixing bolts not included; Shimano FC-E6000 bolts suggested